close
Choose Your Site
Global
Social Media
Author: Site Editor Publish Time: 2026-05-22 Origin: Site
If you are searching for “ASA PVC roof sheet price,” you are likely considering a modern synthetic roofing material that combines the best of both worlds: the weather resistance and color stability of ASA with the strength and affordability of PVC. But prices vary widely. Why? Because several factors determine the cost per square foot – thickness, profile, material composition, UV protection, and order quantity.
As a manufacturer of both UPVC roofing sheets and ASA/PVC composite roof sheets, we understand the nuances of synthetic roofing. Below, we explain what ASA/PVC roof sheets are and break down the key factors that affect their price – so you can make an informed decision for your project.
An ASA/PVC roof sheet is a co‑extruded or composite sheet made from two layers:
Top layer (ASA) – Acrylonitrile Styrene Acrylate. This premium polymer provides exceptional UV resistance, color retention, and gloss retention. It protects the sheet from yellowing, chalking, and fading – even under intense sunlight.
Base layer (PVC) – Unplasticized polyvinyl chloride. This rigid, impact‑resistant material gives the sheet structural strength, durability, and cost‑effectiveness.
The two layers are fused together during extrusion, creating a single sheet that outperforms either material alone. ASA/PVC sheets are available in corrugated, trapezoidal, and tile‑look profiles, with thicknesses typically ranging from 1.5 mm to 3 mm.
The question “ASA PVC roof sheet price” cannot be answered with a single number. Prices depend on:
Total thickness – Thicker sheets use more raw material and cost more.
ASA layer thickness – A thicker ASA top layer (e.g., 0.2 mm vs. 0.1 mm) improves durability but increases cost.
Profile complexity – Simple corrugated costs less than intricate tile‑look profiles.
Color – Standard colors (terracotta, brown, grey) are economical; custom colors cost more.
UV protection – Additional UV stabilizers in the ASA layer add value.
Order quantity – Larger orders reduce the per‑square‑foot price.
Additives – Anti‑fungal, low‑temperature, or fire‑retardant additives increase cost.
ASA/PVC roof sheets are typically manufactured in overall thicknesses from 1.5 mm to 3 mm. The thickness of the ASA top layer (usually 0.1–0.3 mm) also matters.
| Total Thickness | ASA Layer | Typical Application | Relative Cost |
|---|---|---|---|
| 1.5 – 1.8 mm | 0.10–0.15 mm | Patios, carports, mild climates | Lower |
| 2.0 – 2.5 mm | 0.15–0.20 mm | Residential homes, farm buildings | Medium |
| 2.6 – 3.0 mm | 0.20–0.30 mm | Heavy snow/hail zones, industrial roofs | Higher |
A thicker ASA layer provides longer color retention and better UV protection. A thicker overall sheet offers greater impact resistance and stiffness.
The profile of the sheet significantly affects manufacturing cost:
Corrugated – Simplest to extrude, lowest cost per square foot.
Trapezoidal – Slightly higher cost due to sharper angles.
Tile‑look (Roman, Spanish, flat interlocking) – Most expensive because of complex mold shapes and slower production speeds.
For residential homes where aesthetics matter, tile‑look profiles are popular despite the higher price.
ASA is known for excellent color retention. Our ASA/PVC sheets come in a wide range of colors:
Standard colors – Terracotta, chocolate brown, slate grey, charcoal black, forest green, white. Most economical.
Premium colors – Custom matches or special hues. Higher cost due to small batch production.
Finish – Matte or textured finishes cost slightly more than glossy.
Unlike painted sheets, ASA color is integrated into the top layer and will not peel. This justifies a higher price compared to surface‑coated products.
ASA itself is inherently UV‑resistant, but we add extra UV stabilizers to the ASA layer for maximum longevity. Sheets with enhanced UV stabilization cost more upfront but resist yellowing, chalking, and fading for 25+ years.
Cheaper “ASA‑like” sheets may use a thinner ASA layer or lower‑quality resin. Always ask about the ASA layer thickness and UV additive package.
As with any manufactured product, the price per square foot decreases as order size increases. This is because fixed costs (color change, mold setup, extrusion calibration) are spread over more sheets.
Small project (500–1,000 sq ft) – Higher price.
Medium project (1,000–5,000 sq ft) – Moderate price.
Large project (5,000+ sq ft) – Best price.
Contractors and builders who consolidate orders achieve the lowest per‑square‑foot cost.
Depending on your climate, you may want special additives:
Anti‑fungal / anti‑moss – Prevents growth in humid regions.
Low‑temperature impact modifiers – For climates below -20°C (-4°F).
Enhanced fire retardants – For commercial buildings or wildfire‑prone areas.
Anti‑static coating – Reduces dust attraction (greenhouses, cleanrooms).
Each additive increases the price but may be essential for long‑term performance in your specific environment.
When budgeting for an ASA/PVC roof, remember these additional expenses:
Fasteners – Corrosion‑resistant screws with rubber washers.
Flashings and trims – Ridge caps, eaves, side flashings.
Purlins or battens – Supporting structure.
Shipping – Weight and distance affect freight.
Installation labor – DIY saves money; professional installation adds cost.
A sheet with a higher price but better durability (thicker ASA layer, full‑body UV protection) often saves money over the roof’s life.
To receive a custom quote for ASA/PVC roof sheets, provide us with:
Total roof area (square feet or square meters).
Desired overall thickness (1.5–3 mm) and ASA layer thickness if known.
Profile (corrugated, trapezoidal, tile‑look – specify which).
Color (standard or custom).
Any special additives (anti‑fungal, low‑temp, etc.).
Delivery location.
Order quantity.
We will respond with a transparent, per‑square‑foot price – no hidden fees, no pressure.
You may see very low prices for “ASA/PVC” sheets online. Be cautious. Low cost usually means:
Thin overall sheet (under 1.2 mm) – sags and cracks.
Extremely thin ASA layer (under 0.08 mm) – color fades in a few years.
Poor ASA resin quality – yellows despite the name.
No UV stabilizers in the PVC base – base layer degrades.
Our ASA/PVC sheets use a generous ASA layer (0.15–0.3 mm), high‑quality ASA resin, and full‑body UV stabilization in the PVC base. The price reflects this quality, but over 20–30 years, our sheets are more economical than cheap alternatives that need replacement twice.
Vs. pure ASA tiles – Our ASA/PVC sheets cost less than pure ASA because PVC is less expensive than ASA resin. Yet they retain the color stability of ASA on the exposed surface.
Vs. pure UPVC – ASA/PVC sheets are slightly more expensive than pure UPVC due to the added ASA layer. However, they offer superior color retention and gloss for projects where aesthetics are critical.
Vs. surface‑coated PVC – ASA/PVC is much more durable because the color is integrated into the ASA layer, not just painted on. The higher upfront price pays off over time.
So, ASA PVC roof sheet price depends on thickness, ASA layer thickness, profile, color, additives, and quantity. A quality ASA/PVC sheet is an investment in a beautiful, long‑lasting roof that resists fading, yellowing, and weathering for 20–30 years.
As a manufacturer of both UPVC and ASA/PVC roofing sheets, we offer competitive pricing on premium materials. Contact us with your project specifications for a custom quote – no obligation, just honest answers.
What is the difference between ASA/PVC and pure UPVC?
ASA/PVC has a top layer of ASA resin for superior color and UV resistance. Pure UPVC has a uniform composition throughout. ASA/PVC costs slightly more but offers better long‑term aesthetics.
How long will the color last on an ASA/PVC sheet?
With a quality ASA layer (0.15 mm or thicker) and UV stabilizers, expect 20–25 years of excellent color retention. Some very slow fading (5–10%) may occur after 15+ years.
Can ASA/PVC sheets be used for a house roof?
Yes. With thickness of 2.0 mm or more, ASA/PVC sheets are suitable for permanent residential roofs, including areas with snow and moderate hail.
Do you provide samples?
Yes. We offer sample pieces of our ASA/PVC sheets so you can see the color, texture, and layer construction before ordering.
How do I clean ASA/PVC roof sheets?
Use a garden hose, soft brush, and mild soap. Avoid pressure washers above 800 PSI. The ASA surface is easy to clean and resists staining.
