1. Agricultural greenhouse lighting system

Using translucent roof panels (such as ROYAL 1050), by adjusting the transmittance of 40-80% to optimize the plant growth spectrum, and simultaneously blocking UV-B band radiation, its diffuse reflection characteristics avoid local overheating, achieve a balance between natural light effect and light protection, and improve the yield and quality of greenhouse crops.

2. Corrosion-resistant roof of chemical plant

Synthetic resin roof panels use a perfluoropolymer surface to build a chemical barrier, tolerate pH1-12 acid-base environment, and cooperate with hollow structures. The thermal resistance R value reaches 1.2m²·K/W, and maintains dimensional stability under a temperature difference of -40℃ to 120℃, becoming the preferred solution for maintenance-free roofs in chemical areas.

3. Light rail platform awnings

UPVC small trapezoidal panels increase the bending modulus by 25% through the trapezoidal wave peak design, and achieve 12-meter column-free span installation. Its self-cleaning nano-coating is combined with a 15° slope drainage system to ensure zero water accumulation on the platform during heavy rain, and the B1-level flame retardant performance meets the rail transit fire protection standards.

4. Cold chain storage insulation roof

The hollow roof board adopts five-layer co-extrusion technology to form a 2cm thick honeycomb closed-cell structure with a thermal conductivity as low as 0.032W/m·K, which is 40% energy-saving compared with traditional color steel tiles. It is combined with an aluminum foil reflective layer to block 95% of infrared radiation and reduce the compressor operation time by 30% when maintaining a warehouse temperature of -25℃.

5. Villa light guide lighting system

The combined roof adopts a prismatic translucent board + a 3mm thick UPVC impact-resistant layer, which transmits sunlight to the underground space through a fully reflective light guide tube. The illumination value reaches 800lux, and the electric blinds are used to adjust the amount of light entering, achieving a 65% reduction in lighting energy consumption throughout the year.

6. Offshore aquaculture awning

The ASAPVC sheet has no aging after 3000 hours of salt spray test. Its gradient color change technology automatically adjusts the light transmittance (50-20% changes with the intensity of sunlight), providing a bionic light environment for marine cultivation, and with the design of 12-level typhoon-resistant reinforcement ribs, it ensures the stable operation of the marine ranch.

FAQ

Q: Why can't I use standard metal screws for resin tiles?
A: Standard screws rust easily and lack the necessary expansion space. Our waterproof fastener sets feature a specialized cap and a wide EPDM washer that accommodates the thermal expansion of resin tiles while providing a permanent watertight seal.

Q: Are these accessories UV-resistant like the main tiles?
A: Absolutely. All our visible accessories are coated with the same high-thickness ASA layer as the main tiles. This ensures they won't become brittle, crack, or discolor, maintaining consistent performance for over 20 years.

Q: Does the waterproofing kit include solutions for valley areas?
A: Yes. Our range includes Yin-Angle Drainage Sinks and valley flashings specifically designed to handle high water volumes at internal roof corners, where leaks are most likely to occur.

Q: How do the eave-seal strips help with waterproofing?
A: The eave-seal drainage strips block the gap between the tile and the gutter. They prevent wind-driven rain from blowing back under the tiles and also keep out birds and debris that could clog your drainage system.

Q: Is it difficult to install these accessories on an existing roof?
A: Most of our waterproofing accessories are designed for "easy-fit" integration during or after the main installation. However, for the best results, we recommend planning the full accessory layout during the initial construction phase to ensure total system harmony.