In modern architectural roof design, a typical T-shaped ridge intersection is formed when side wings, corridors, or porches intersect the main building perpendicularly. Traditional methods often rely on extensive manual cutting and sealants, resulting in poor aesthetics and a high risk of leaks. Our ASA synthetic resin T-shaped ridge tile is a professional solution specifically designed for these vertical intersection points.
1. Agricultural greenhouse lighting system
Using translucent roof panels (such as ROYAL 1050), by adjusting the transmittance of 40-80% to optimize the plant growth spectrum, and simultaneously blocking UV-B band radiation, its diffuse reflection characteristics avoid local overheating, achieve a balance between natural light effect and light protection, and improve the yield and quality of greenhouse crops.
2. Corrosion-resistant roof of chemical plant
Synthetic resin roof panels use a perfluoropolymer surface to build a chemical barrier, tolerate pH1-12 acid-base environment, and cooperate with hollow structures. The thermal resistance R value reaches 1.2m²·K/W, and maintains dimensional stability under a temperature difference of -40℃ to 120℃, becoming the preferred solution for maintenance-free roofs in chemical areas.
3. Light rail platform awnings
UPVC small trapezoidal panels increase the bending modulus by 25% through the trapezoidal wave peak design, and achieve 12-meter column-free span installation. Its self-cleaning nano-coating is combined with a 15° slope drainage system to ensure zero water accumulation on the platform during heavy rain, and the B1-level flame retardant performance meets the rail transit fire protection standards.
4. Cold chain storage insulation roof
The hollow roof board adopts five-layer co-extrusion technology to form a 2cm thick honeycomb closed-cell structure with a thermal conductivity as low as 0.032W/m·K, which is 40% energy-saving compared with traditional color steel tiles. It is combined with an aluminum foil reflective layer to block 95% of infrared radiation and reduce the compressor operation time by 30% when maintaining a warehouse temperature of -25℃.
5. Villa light guide lighting system
The combined roof adopts a prismatic translucent board + a 3mm thick UPVC impact-resistant layer, which transmits sunlight to the underground space through a fully reflective light guide tube. The illumination value reaches 800lux, and the electric blinds are used to adjust the amount of light entering, achieving a 65% reduction in lighting energy consumption throughout the year.
6. Offshore aquaculture awning
The ASAPVC sheet has no aging after 3000 hours of salt spray test. Its gradient color change technology automatically adjusts the light transmittance (50-20% changes with the intensity of sunlight), providing a bionic light environment for marine cultivation, and with the design of 12-level typhoon-resistant reinforcement ribs, it ensures the stable operation of the marine ranch.
FAQ
Q: What is the specific use case for a "T-Type" Three-Way tile?
A: It is specifically designed for T-junctions, where one ridge line terminates perpendicularly into another. This is common in buildings with side wings, porch attachments, or corridors that join the main structure at a 90-degree angle.
Q: How does the T-Type differ from a standard Y-Type three-way tile?
A: A Y-Type tile is for three ridges meeting at equal angles (usually 120°), whereas the T-Type is for a "T" intersection where one ridge hits the side of another at a 90° angle. Using the correct type ensures a proper interlocking fit and prevents leakage.
Q: Is this T-Type connector compatible with different roof pitches?
A: Our T-Type ridge tiles are designed to accommodate standard pitch angles. Due to the inherent flexibility of the ASA-PVC material, they can be slightly adjusted during installation to ensure a snug fit over the main ridge and the perpendicular secondary ridge.
Q: Will it remain waterproof under heavy wind and rain?
A: Yes. The T-Type tile features deep overlapping flanges that sit over the ridge tiles on all three sides. When secured with our specialized waterproof screws and EPDM washers, it creates a robust, leak-proof seal that prevents wind-driven rain from entering the roof cavity.
Q: Can I get this accessory in the same color as my main tiles?
A: Absolutely. We provide a full range of colors (e.g., Brick Red, Grey, Blue) using the same ASA color-stable technology. This ensures that your T-Type connectors match your main roofing sheets perfectly and age at the same rate without noticeable fading.
