You are here: Home / Products / Accessories / Resin Tile Accessories / End-Tile-Head

End-Tile-Head

Professional End Tile Heads for Superior Hip Ridge Finishing Our End Tile Heads are the perfect solution for sealing the terminal points of hip ridges where they meet the eaves. Engineered from high-impact ASA synthetic resin, these end caps provide a critical barrier against water ingress, wind uplift, and pests at the roof’s lower corners. Designed with a sleek, rounded profile, they integrate seamlessly with our hip ridge tiles to offer a professional, unified look. Highly UV-resistant and durable, these end-of-ridge fittings ensure that every corner of your roofing system is protected, aesthetically polished, and built to last.

Quantity:
Availability:





Inquire Add to Basket

Product Advantages

Roducts Features

The ASA ridge end cap, a crucial finishing component at the intersection of the roof ridge and eaves, combines superior protection with traditional Chinese aesthetics. Manufactured using an integrated molding process and high-weather-resistant ASA resin, it ensures the color remains vibrant for over 20 years. This component tightly seals the end of the ridge, effectively preventing rainwater from seeping into the roof structure through gaps due to gravity, while also enhancing the visual continuity of the ridge line. Whether for the four-sloped roof of a villa or a garden pavilion, this end cap is an essential component for achieving overall roof system integrity and waterproof safety.

Application

ab16587788b76b6ceecf7b82d1cf83df

1. Agricultural greenhouse lighting system

Using translucent roof panels (such as ROYAL 1050), by adjusting the transmittance of 40-80% to optimize the plant growth spectrum, and simultaneously blocking UV-B band radiation, its diffuse reflection characteristics avoid local overheating, achieve a balance between natural light effect and light protection, and improve the yield and quality of greenhouse crops.

2. Corrosion-resistant roof of chemical plant

Synthetic resin roof panels use a perfluoropolymer surface to build a chemical barrier, tolerate pH1-12 acid-base environment, and cooperate with hollow structures. The thermal resistance R value reaches 1.2m²·K/W, and maintains dimensional stability under a temperature difference of -40℃ to 120℃, becoming the preferred solution for maintenance-free roofs in chemical areas.

3. Light rail platform awnings

UPVC small trapezoidal panels increase the bending modulus by 25% through the trapezoidal wave peak design, and achieve 12-meter column-free span installation. Its self-cleaning nano-coating is combined with a 15° slope drainage system to ensure zero water accumulation on the platform during heavy rain, and the B1-level flame retardant performance meets the rail transit fire protection standards.

4. Cold chain storage insulation roof

The hollow roof board adopts five-layer co-extrusion technology to form a 2cm thick honeycomb closed-cell structure with a thermal conductivity as low as 0.032W/m·K, which is 40% energy-saving compared with traditional color steel tiles. It is combined with an aluminum foil reflective layer to block 95% of infrared radiation and reduce the compressor operation time by 30% when maintaining a warehouse temperature of -25℃.

5. Villa light guide lighting system

The combined roof adopts a prismatic translucent board + a 3mm thick UPVC impact-resistant layer, which transmits sunlight to the underground space through a fully reflective light guide tube. The illumination value reaches 800lux, and the electric blinds are used to adjust the amount of light entering, achieving a 65% reduction in lighting energy consumption throughout the year.

6. Offshore aquaculture awning

The ASAPVC sheet has no aging after 3000 hours of salt spray test. Its gradient color change technology automatically adjusts the light transmittance (50-20% changes with the intensity of sunlight), providing a bionic light environment for marine cultivation, and with the design of 12-level typhoon-resistant reinforcement ribs, it ensures the stable operation of the marine ranch.

FAQ

Q: What is the difference between a Flat Tile Head and an End Tile Head?
A: A Flat Tile Head is typically used for the ends of the horizontal Main Ridge, while an End Tile Head is designed specifically for the lower ends of Hip Ridges (diagonal ridges) where they reach the eave corners.

Q: Does the End Tile Head improve wind resistance?
A: Yes. By sealing the open end of the hip ridge, it prevents high winds from entering the ridge cavity, which significantly reduces the risk of "wind uplift" that could otherwise dislodge tiles during a storm.

Q: Is the installation of the End Tile Head complicated?
A: Not at all. It is designed to overlap the last hip ridge tile perfectly. Simply position it at the end of the ridge and secure it with a waterproof screw and cap. No specialized adhesive is required for a standard fit.

Q: Will it withstand salt spray in coastal regions?A: Absolutely. Being made of ASA/PVC synthetic resin, it is completely rust-proof and corrosion-resistant. Unlike metal end caps, it will not pit or degrade when exposed to salt-heavy air or acid rain.

Q: Are there different sizes available for different tile profiles?
A: Our End Tile Heads are standardized to fit our most popular circular ridge tile profiles. We recommend checking the wave height and width of your ridge tiles with our sales team to ensure a 100% seamless match before purchasing.